Toro Flex-Force Power System 60V MAX Manuel De L'utilisateur page 5

Safety-Alert Symbol
The safety-alert symbol
manual and on the machine identifies important safety
messages that you must follow to prevent accidents.
Safety-alert symbol
The safety-alert symbol appears above information
that alerts you to unsafe actions or situations and
is followed by the word DANGER, WARNING, or
CAUTION.
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious
injury.
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
This manual uses two other words to highlight
information. Important calls attention to special
mechanical information and Note emphasizes general
information worthy of special attention.
(Figure 2) shown in this
Figure 2
Safety
IMPORTANT SAFETY
INSTRUCTIONS
WARNING
g000502
When using an electric machine, always
read and follow basic safety warnings and
instructions to reduce the risk of fire, electric
shock, or injury, including the following:
Read All Instructions
I. Training
1. The operator of the machine is responsible for
any accidents or hazards occurring to others or
their property.
2. Read and understand the contents of this
Operator's Manual before you start the machine.
Ensure that everyone using this machine knows
how to use it, knows how to shut it off quickly,
and understands the warnings.
3. Do not allow children to use or play with the
machine, battery pack, or the battery charger;
local regulations may restrict the age of the
operator.
4. Do not allow children or untrained people to
operate or service this device. Allow only people
who are responsible, trained, familiar with the
instructions, and physically capable to operate
or service the device.
5. Before using the machine, battery pack, and
battery charger, read all the instructions and
cautionary markings on these products.
6. Become familiar with the controls and proper
use of the machine, battery pack, and battery
charger.
3