Toro Flex-Force Power System 60V MAX Manuel De L'utilisateur page 16

Operation
Installing the Battery Pack
Important:
Use the battery pack only in
temperatures that are within the appropriate
range; refer to Specifications (page
1. Make sure that the vents on the battery are clear
of any dust and debris.
2. Lift up the battery-compartment lid (A of
11).
3. Line up the cavity in the battery pack with the
tongue on the machine and slide the battery
pack into the compartment until it locks into
place (B of Figure
4. Close the battery-compartment lid (C of
11).
Note:
If the battery-compartment lid does not
close completely, the battery is not fully installed.
13).
11).
Figure 11
Starting the Machine
1. Ensure that the battery pack is installed in the
machine; refer to
(page
2. Insert the electric-start button into the electric
starter (A of
3. Squeeze the bail and hold it to the handle (B
and C of
Note:
Figure
turn on and the battery-charge indicator lights on
the battery illuminate.
4. Press the electric-start button until the motor
starts (D of
Figure
g282250
14
Installing the Battery Pack
14).
Figure 12).
Figure 12).
When you squeeze the bail, the lights
Figure 12).
Figure 12
g288479