Télécharger Imprimer la page

Panasonic PV-GS55 Manuel D'utilisation page 67

Publicité

Les langues disponibles

Les langues disponibles

≥Operate the [OFF/ON] switch or Mode Dial
≥Insert or eject a cassette
ª Playing Back
Repeat Playback
If you continue to press the [1] Button for
5 seconds or longer, the Palmcorder switches to
Repeat Playback Mode, and the [R !] Indication
appears. (To cancel Repeat Playback Mode, set
the [OFF/ON] Switch to [OFF].)
Listening to Playback Sound through
Headphones
If you want to use the headphones to listen to the
playback sound, set [AV JACK] to
[OUT/PHONES] and connect the headphones to
the [PHONES] Jack (
-13-
this case, no sound (including warning and
shutter sounds) will be reproduced through the
built-in speaker of the Palmcorder.
Choosing Sound during Playback
You can select the sound by using the
[AUDIO OUT] setting on the [PLAYBACK]
Sub-Menu.
STEREO: Stereo Sound (main sound and sub
sound)
L:
Left channel sound (main sound)
R:
Right channel sound (sub sound)
≥If you dub a tape recorded at the [12bit]
selected as the [AUDIO REC] on the
[RECORDING] Sub-Menu, playback sound
becomes stereo sound regardless of the
[AUDIO OUT] setting if [12bit AUDIO] is set to
[MIX].
ª Index Search Functions
≥Index Search may not be possible at the
beginning of the tape.
≥Scene Index Search may not function properly if
the interval between 2 scene index signals is
less than 1 minute.
ª Playback Zoom Function
≥You cannot adjust the sound volume with the
Remote Controller in Playback Zoom Mode.
≥If you turn off the Palmcorder power or if you
operate the Mode Dial, Playback Zoom Mode is
automatically cancelled.
≥Even if Playback Zoom Functions are being
used, images that are output from the DV
Terminal (
) are not enlarged.
-13-
≥As you enlarge an image, the quality of the
image deteriorates.
≥During a Playback Zoom, the Variable Speed
Search Function cannot be changed with the
Remote Controller.
ª Playback Digital Effect Functions
≥Signals of images to which digital effects are
added during playback cannot be output from
the DV Terminal (
).
-13-
Others
) on the Palmcorder. In
≥You cannot use the Wipe or Mix Function while
playing back the non-recorded portion of tape.
ª Playing Back a Card
≥If a blank (nothing recorded) Card is played, the
screen becomes white.
≥If you attempt to play back a file recorded in a
different format or if file data is defective, the
whole display becomes bluish and the
[UNPLAYABLE CARD] Indication may appear
as warning.
≥When playing back a picture recorded on other
equipment, its size and that of this Palmcorder
may appear differently.
≥When playing back a picture recorded on other
equipment, the picture may not be played back
or the quality of pictures may be deteriorated.
≥When playing back a non standardized file, the
Folder File Number may not be displayed.
≥In the following cases, black bars may appear,
depending on the playback device.
≥When playing back a mega-pixel still-picture
with this Palmcorder and recording it onto a
tape
≥Changing the picture size to 640k480 pixels
with DV STUDIO
≥The file format supported by this Palmcorder is
ASF. (Not all the ASF formatted files will be
played back.)
≥When you set [SCREEN] on the [DIGITAL]
Sub-Menu to [NORMAL] in playing back
MPEG4 moving pictures, they are displayed
smaller. This is not a malfunction.
≥Moving pictures are kept still during
Cue/Review playback. Only the counter number
increases or decreases.
≥MPEG4 data cannot perform, Slow Motion
Playback (forward direction and reverse
direction), Still Advance Playback (forward
direction and reverse direction) or Playback with
Zoom Lever.
≥If you try to play back an MPEG4-recorded
image for which the [MPEG4 MODE] was set to
a mode other than [ECONOMY] on other
PANASONIC cameras, this image will not be
displayed, and the indication [PLEASE
RE-OPERATE AFTER PUSHING RESET
BUTTON], etc., may appear. This is not a
malfunction.
≥For the MPEG4 moving pictures recorded on
other equipment, [UNPLAYABLE CARD]
Indication may be displayed when they are
played back. If the [1] Button is pressed in this
case, [!] will be displayed for a few seconds
and the next image will be displayed.
≥The MPEG4 data cannot be output from the DV
Terminal.
-67-

Publicité

loading