Table Des Matières; Important Safety Instructions; Safety Logos - Delta ShopMaster S26-260L Mode D'emploi

IMPORTANT SAFETY INSTRUCTIONS ................................... 2
Safety logos ......................................................................... 2
GENERAL POWER TOOL SAFETY RULES ............................ 3
PROPOSITION 65 ...................................................................... 4
MITER SAW SAFETY RULES ................................................... 4
POWER CONNECTIONS .......................................................... 5
Double Insulation ................................................................. 5
Electrical Connection .......................................................... 6
Polarized Plugs .................................................................... 6
Extension Cords .................................................................. 6
FEATURES ................................................................................ 6
Product Specifications ........................................................ 6
Know Your Compound Miter Saw ...................................... 7
UNPACKING ............................................................................. 8
ASSEMBLY ................................................................................. 9
Saw Arm Lock Pin ............................................................... 9
Attaching Miter Lock Knob ................................................. 9
Mounting the Saw to a Stable Surface ............................. 10
Attach Horizontal Work Clamp .......................................... 10
Install Dust Collection Bag ................................................ 11
Install Batteries for Laser ................................................... 11
PREPARING YOUR SAW FOR USE ....................................... 12
Install/Replace the Blade .................................................. 12
Align the Blade to the Table .............................................. 13
Using the Laser Guide ....................................................... 14
To Remove Your Mark ............................................... 14
To Cut on Your Mark .................................................. 14
To Cut without Removing Your Mark ......................... 14
Free Warning Label Replacement ............................. 14

IMPORTANT SAFETY INSTRUCTIONS

CAREFULLY READ AND FOLLOW ALL WARNINGS AND INSTRUCTIONS ON YOUR
PRODUCT AND IN THIS MANUAL. SAVE THIS MANUAL. MAKE SURE ALL USERS ARE
FAMILIAR WITH ITS WARNING AND INSTRUCTIONS WHEN USING THE TOOL. Improper operation, maintenance or
modification of tools or equipment could result in serious injury and/or property damage.
If you have any questions or concerns relative to the use of your tool or the contents of this manual, stop using the tool
and contact Delta Power Equipment Corporation Customer Care at 1-800-223-7278.
This manual contains information that is important for you to know and understand. This information relates to protecting
YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the
symbols below. Please read the manual and pay attention to these sections.
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may
result in property damage.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
TABLE OF CONTENTS
OPERATION ............................................................................. 15
TIPS FOR CUTTING AND SUPPORTING WORKPIECES .... 17
ADJUSTMENTS ....................................................................... 19
MAINTENANCE ...................................................................... 21
TROUBLESHOOTING ............................................................. 22
ACCESSORIES ........................................................................ 22
PARTS, SERVICES AND WARRANTY ASSISTANCE ........... 22

SAFETY LOGOS

2
Applications ....................................................................... 15
Power Switch Lock............................................................ 15
Cross Cuts ......................................................................... 16
Bevel Cuts .................................................................. 16
Compound Miter Cuts ............................................... 16
Tips for Cutting Crown Molding ........................................ 17
Cutting Warped Material ................................................... 18
Clamping Wide Workpieces .............................................. 18
Supporting Long Workpieces............................................ 19
Arm Pivot ........................................................................... 19
Positive Stop Screw .......................................................... 19
Bevel Pivot ........................................................................ 20
Laser Guide ....................................................................... 20
Keep Machine Clean ......................................................... 21
General Maintenance ........................................................ 21
Lubrication ......................................................................... 21
Brush Replacement ........................................................... 21
Failure to Start ................................................................... 22
Three-Year Limited Warranty ............................................. 22
Replacement Parts ............................................................ 23
Service and Repairs .......................................................... 23
French ................................................................................ 24
Spanish .............................................................................. 47