Toro Z Master Professional 7000 Serie Manuel D'utilisation page 50

Draining the Engine Oil
1. Start the engine and let it run for 5 minutes.
Note:
This warms the oil so it drains better.
2. Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
3. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
Figure 59
Note:
Dispose of the used oil at a recycling
center.
Changing the Engine-Oil Filter
1. Drain the oil from the engine; refer to
the Engine Oil (page
2. Change the engine-oil filter
g032646
3. Add oil; refer to
g032642
48
Draining
48).
(Figure 60).
Figure 60
Adding Engine Oil (page
g032649
g032644
49).