Customizing The Equalizer Curve - Eq3 Tune; Adjusting Setup Items - Menu - Sony CDX-GT828U Mode D'emploi

Customizing the equalizer curve
— EQ3 Tune
"Custom" of EQ3 allows you to make your own
equalizer settings.
1
Select a source, then press the select
button.
2
Rotate the control dial to select "EQ3
parametric," then press the select
button.
3
Rotate the control dial to select
"Custom," then press (SEEK) +.
4
Rotate the control dial to select "EQ3
Mode Tune," then press the select
button.
5
Rotate the control dial to select the
desired frequency range from "LOW,"
"MID" or "HI," then press the select
button.
6
Rotate the control dial to select the
center frequency you wish to adjust,
then press the select button.
Selectable frequency in each range:
LOW: 60 Hz or 100 Hz
MID: 500 Hz or 1.0 kHz
HI: 10.0 kHz or 12.5 kHz
7
Rotate the control dial to adjust the
equalizer curve.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
8
Press the select button.
Repeat steps 5 to 8 to adjust other frequency
ranges.
9
Press (BACK) or (SEEK) – twice.
The display returns to normal play/reception
mode.
To restore the factory-set equalizer curve,
select "EQ3 Mode Initialize" and "Yes" in
step 4.
Tip
Other equalizer types are also adjustable.
Adjusting setup items — MENU
1
Press and hold the select button.
The setup display appears.
2
Rotate the control dial until the
desired menu item appears, then
press the select button.
3
Rotate the control dial to select the
setting, then press the select button.
The setting is complete.
4
Press (BACK).
The display returns to normal play/reception
mode.
The following items can be set (follow the page
reference for details):
" " indicates the default settings.
z
Setup
Clock Adjust (page 5)
CT (Clock Time)
To set "on" or "off" (
z
Beep
To set "on" ( ) or "off."
z
RM (Rotary Commander)
To change the operative direction of the rotary
commander controls.
– "NORM" ( ): to use the rotary commander in
z
the factory-set position.
– "REV": when you mount the rotary
commander on the right side of the steering
column.
AUX Audio
To turn the AUX source display "on" (
"off" (page 18).
Auto Off
To shut off automatically after a desired time
when the unit is turned off: "NO" (
"30 min" or "60 min."
Display
Demo (Demonstration)
To set "on" ( ) or "off."
z
continue to next page t
) (page 13, 14).
) or
z
), "30 sec,"
z
17