Ravelli RBH 150 V Manuel D'utilisation Et D'entretien page 184

Installation of the stove on a floor support (optional)
To install the appliance on the support, proceed as follows:
step action
1 Screw the support to the floor
2 Adjust the vertical height of the fireplace
1
The stove is supplied with a micro-switch placed to the side of the rear jamb on the right. After dismantling/re-assembly operations of
the stove on the base, check the micro-switch activates following insertion of the stove.
Use and maintenance manual RBH 150 V - RBH 200 V
x8
2
EN
Rev.2 15/07/2021
Pag.35