Bio Bronpi CARLOTA-MF Instructions D'installation, D'utilisation Et D'entretien page 49

Sub-menu 02-01- Enable chrono
To programme the boiler or thermo-stove it is necessary to access
sub-menu 4-1 "Enable chrono (clock)" and pressing button nº 3 will
show the next screen (see drawing D28).
The default, in the top left corner shows "off". By touching buttons nº
1 or nº 2 we can change it to "on" and notify the boiler or thermo-
stove the intention to programming it (see drawing D29).
Next, we need to choose the set up that we want to introduce: daily,
weekly or weekend. To do so from the previous screen, we need
to press repeatedly buttons nº5 and nº6 until we reach the desired
option.
Submenu 02.02. Daily Programme
To choose the daily program of the boiler or thermo-stove we need
to go to the following screen (see drawing D30):
By pressing just once button nº3 we access to the daily
programming submenu of the boiler or thermo-stove. By default, it
will show the following screen (see drawing D31).
We need to change the option "OFF" to "ON" by pressing buttons
nº1 and nº2 in order to confirm the daily programme.
Now we need to choose the time that we would like the boiler or
thermo-stove to be switched ON/OFF. To do this, there are 2 times
available to start and 2 to stop the boiler: START 1 and STOP 1;
START 2 and STOP 2.
For example:
Start at 09:00 hours / stop at 14:30 hours.
Start at 20:30 hours / stop at 23:00 hours.
From the previous screen, we press button nº6 and it will show up
(see drawing D32):
By pressing nº1 and nº2 buttons we modify the value "OFF" and we
set the time of the first start (see drawing D33):
In the same way we can proceed to set the first time to stop (see
drawing D34 and D35):
In the case that you want to set up just one time to start and stop,
the options START 2 and STOP 2 should be "OFF".
If you want to set another on and off schedule, introduce the values
of the second schedule as explained previously. In this way we will
have set the program schedule with two starting hours and two stop
hours.
It is also possible to schedule one automatic start hour and manual
stop hour (or vice versa).
Example: START 1: 08:00 hours and STOP 1: "off"
or
START 1: "off" and STOP 1: 22:00 hours.
Sub-menu 02-03- Weekly programme
NOTE: Please, make the set up carefully in order to avoid
program intermeshing. Or turning off the boiler in a different
program, at a time when you have set it to run from an alternative
programme. .
If we intend to make a weekly set up of the boiler or thermo-stove we
need to take into account that, in that case, we have 4 different times
to start and stop. So we need to ascribe to every day of the week
the activation or not, as appropriate.
In order to activate them we need to start from the following screen
(see drawing D36):
By pressing only once button no. 3, we access the weekly
programme sub-menu of the thermo-stove. By default, it will show
the following screen (see drawing D37):
We need to change option "OFF" to "ON" by pressing buttons no.1
and no.2. In this way we are confirming that the weekly set up has
been selected:
M-4-2-3
PROGRAMME
WEEKLY
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
D36
48 THERMO-STOVES AND BOILERS WITH AUTOMATIC CLEANING
Off
M-4-1-01
ENABLE
CHRONO
On
M-4-1-01
ENABLE
CHRONO
M-4-2
PROGRAMME
DAY
OFF
M-4-2-01
PROGRAMME
DAILY
OFF
M-4-2-02
START 1
DAY
09:00
M-4-2-02
START 1
DIA
OFF
M-4-2-03
STOP 1
DAY
14:30
M-4-2-03
STOP 1
DAY
OFF
M-4-3-01
PROGRAMME
WEEKLY
D28
D29
D30
D31
D32
D33
D34
D35
D37