Toshiba RAV-SM562BT-E Manuel D'installation page 16

4
AIR DUCTING WORK
Hanging of indoor unit
Lift up the unit with a lifter, etc., and set the hanging metal in the hanging bolt.
• Hook nut of the hanging bolt to the groove of the hanging metal on the main unit.
• Using the level, etc., install the main unit horizontally.
Failure to do this will cause water leakage
Mounting of filter and canvas for suction port
1. Mount a long-life filter or a high-performance filter according to each Installation Manual.
2. Mount the canvases for suction port to the lower side of the above filter.
Mounting of remote controller
For the mounting of the wired remote controller, refer to the Installation Manual attached to the remote controller.
• Take out the remote controller cord together with the refrigerant pipe or drain pipe. Be sure to set the remote
controller cord so that it passes through the upper side of the refrigerant pipe and drain pipe.
For reference
<Square duct>
(Procured locally)
Return Air side
E
18
25
J
18
A
Model
SM562BT
Return Air side
SM802BT
(Return filter side)
SM1102, 1402BT
SM562BT
Supply Air side
SM802BT
SM1102, 1402BT
All manuals and user guides at all-guides.com
G-Ø5 mm holes
For return
air side
C
B
A
18
25
25
J
18
H
A B
700 —
1000 700
1350 1050
550 455 (65 x 7)
850 715 (65 x 11)
1200 1105 (65 x 17)
Washer
Supply Air side
For supply
air side
18
25
18 J
C D E F
400 — 420 390
430 — 420 390
580 — 420 390
65 530 265 245
65 830 265 245
65 1180 265 245
13
Nut
Hanging bracket
Hanging bolt
G-Ø5 mm holes
D
A
18
25
J
18
H
A
G H I J
4 350 195 —
8
500 195 350
8 675 195 525
20 275 132.5 227.5 130
28 425 132.5 307.5 130
40 600 132.5 552.5 130
25
K
—
—
—