Husqvarna 520iHE3 Manuel D'utilisation page 15

Maintenance
Do a check of the connections between the battery and the product. Do a check
of the connection between the battery and the battery charger.
To examine the battery and the
battery charger
1. Examine the battery for damages, for example
cracks.
2. Examine the battery charger for damages, for
example cracks.
3. Make sure that the connection cord of the battery
charger is not damaged and that there are no cracks
in it.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry
cloth. Keep the battery guide tracks clean.
3. Make sure that the terminals on the battery and the
battery charger are clean before the battery is put in
the battery charger or the product.
To clean and lubricate the product
1. Use a cleaning agent to clean resin and remaining
plant particles from the blades.
2. Make sure that the blade bars are not damaged.
Make sure that the blade bars have no deformation.
Remove burrs with a file.
3. Make sure that the blades move freely.
4. Lubricate the blade bars before long periods of
storage.
31 - 001 - 31.10.2018
5. Speak to your dealer for information on lubrication
points and volume of grease in the gear.
Use a high quality grease that is special for
Husqvarna products.
To adjust the tilt tension of the
cutting deck
1. Turn the screw to adjust the tilt tension.
2. Turn the screw clockwise or counterclockwise to
easily tilt the cutting deck.
Before
Weekly Monthly
use
X
15