Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
840154800 Ev03.qxd
10/30/06
Parts and Features
1. Spray and Blast Buttons
2. Adjustable Steam Control
3. Water Fill Cover
4. Spray Nozzle
5. Self-Clean Button
6. Temperature Control
Dial
7. Soleplate
8. Water Window
9. Auto Shutoff Reset
Button/Power Light
10. Heel Rest
11. Cord
Before First Use
• Steam vents should be cleaned
before first use. Prepare iron for
steam ironing, then iron over an old
cloth for a few minutes while letting
the iron steam. Press the Blast button
several times to clean the vents. Then
follow the Self-Cleaning instructions.
Features
Adjustable Steam
This feature provides minimum steam
for wool or maximum
steam for linen. Set
to
Dry Iron.
Spray and Blast of Steam Buttons
Push Blast Button for
an extra blast of
steam. Push Spray
Button to release a
fine spray of water for
Spray
Blast
difficult wrinkles in
cotton or linen.
9:10 AM
Page 3
• Many irons spit or sputter during
the first few uses with tap water.
This happens as the steam chamber
becomes conditioned. This will stop
after a few uses.
• During first use of the iron, it may
appear to smoke. This will stop and
does not indicate a defect or hazard.
Auto Shutoff Reset Button/
Power Light
The button/light comes on when the
to change to
Auto Shutoff
Button/Power
Light
iron is first plugged
in. After one hour,
the iron will shut off
and the button/ light
will go out. Push the
button/ light to turn
the iron back on.
3
Publicité
