Equipment Description; Lcd Display And Keys; Use; Switching On - Tesmed Max 830 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

equipment description (fig. 8 pag. 124)

LCD display and keys

a
Tesmed logo
b
Program number
c
Program symbol
d
Low battery symbol
e
Frequency symbol
f
Selected output channels (4)
g
Relative intensity for each 4 output
h
Function keys (MODE)
i
Decrease key (
j
Increase key (

use

The Tesmed Max 830 has 99 programs (01 to 99).
Programs 01 to 20 can be personalised and you can change the frequency and treatment time values.
Programs 21 to 99 are pre-set with a fixed duration and cannot, therefore, be changed.
Before using the Tesmed Max 830, you must choose the treatment type you want, using the
personalised or set treatment tables, find the relevant program and then apply the electrodes to the
body part you want to treat and connect them to the equipment.

Switching on

To switch the Tesmed Max 830 on, press key
test procedure, during which the display shows all the available functions (fig. 9 pag 125); then appears
on the display what shown in fig. 10 pag 125.
- "Display lighting" function:
The display automatically switches off after about 20 seconds when the equipment is not in use.
The display is lit again when you press any key.
- "Self switching-off" function
The Tesmed Max 830 automatically switches off is not used for more 5 minutes in order to save
the battery.

Modes

Press key
repeatedly to select the number of channels you want to use to suit the treatment and then
key
to select the program (fig. 11 pag 125).

Programs 01 to 20

Programs 01 to 20 let you personalise the treatment time, once selected. Press key
the relevant symbol
Use keys
to adjust the treatment time: min 1 minute to max 60 minutes. Press key
again to control the intensity.
)
)
starts flashing on the display (fig. 12 pag 125).
k
ON/OFF and select channels double function key
l
Intensity symbol
m
Keyboard block and ON block symbol
n
Timer symbol
o
Treatment time and remaining time
p
Clock symbol
q
Output channels
r
Battery recharger socket
s
Battery door
t
Removable belt hook
for approximately 2 seconds: the system runs a self-
- 32 -
and

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières