resideo Honeywell Home R200C-N1 Guide D'installation Et D'utilisation page 10

expose the interconnected CO alarm and batteries to extreme temperatures. Some common household
substances can affect the sensitivity of the interconnected CO alarm. Do not use household cleaners,
polishes, perfumes or aerosol sprays on or close to the interconnected CO alarm. Avoid the use of nail
polish remover, model paint or model glue close to the interconnected CO alarm. This interconnected CO
alarm is designed to protect individuals from the acute effects of carbon monoxide exposure. It will not
fully safeguard individuals with specific medical conditions. If in doubt consult a medical practitioner.
Long exposure to low levels (>10 ppm) of CO may cause chronic effects. If in doubt consult a medical
practitioner.
14. Specifications
Gas detected
Lifetime
Power supply
Wireless frequency
TX power
Wireless distance
Installation
Dimensions
Weight
Audible
Sensor technology
Type of device
Operation Ambient Condition
Storage/Transport Ambient Condition
IP rating
15. Service and contact
For questions about the installation, use or operation of this interconnected CO alarm please visit
www.resideo.com Please Note: While every effort has been made to ensure accuracy in this
publication, no responsibility can be accepted for errors or omissions. Data may change, as well as
legislation, and you are strongly advised to obtain copies of the most recently issued regulations,
standards, and guidelines. This publication is not intended to form the basis of a contract.
: Carbon Monoxide
: 10 years
: Long life lithium battery, 3 V, sealed for the life of the product
(no replacement necessary)
: 868 MHz
: 8dbm
: ＞100 meters in free field
: Wall mount, ceiling
: 95 mm x 95 mm x 25 mm
: 120 g
: ≥85 dB @ 3 m
: Electrochemical Cell
: Type-B
: Temperature -10°C to +45°C
: Humidity 25 – 95% RH (non-condensing)
: Temperature -15°C to +50°C
: Humidity 20 – 95% RH (non-condensing)
: IP44
-10-