Publicité
Les langues disponibles
Les langues disponibles
5
Installation of appliance
Install the inner flue to the flue fastening plate that
is secured to the wall from its upper outer edges
(Figure 12).
(Figure 12)
5.6 Installation of air baffle
While using with the carbon filter, air baffle is
provided with your appliance with the aim of re-
releasing the air which is cleaned with carbon filter
from the perforated located on the flue. Assemble
the air baffle as below.
(Figure 13)
There is a tab in the middle of the flue connection
plate. Place the middle point of this tab on the line
that is drawn perpendicular to the wall. Align hori-
zontally and mark the holes where the connection
Cooker Hood / User Manual
plate will be mounted via a pen (Figure 13/A, B).
Drill the marked points with Ø6mm drill and in-
sert two Ø6mm plastic dowels in the drilled holes
(Figure 13/A, B).
Fix the flue connection plate to the wall with
3.9x22 screws (Figure 13/A, B).
For air baffle assembly, install point C, D, E, F with
Ø6mm drill and Ø6mm plastic dowels (Figure
13).
Assemble cooker hood's body (Figure 9).
(Figure 14)
1. Flap pin socket
2. Flap pin
Attach the flue flaps to the plastic flue adapter in
the package content as follows.
Insert the plastic pin (Figure 14/area no. 2) on
the pin socket on the motor exhaust (Figure 14/
area no.1). Then bend the flap lightly to insert the
other pin on the flap and insert the other pin to its
socket (Figure 14).
19 / EN
Publicité
