Beko BHCA63741BHSI Mode D'emploi page 13

3
Operation of the appliance
3.4 Efficient use in terms of
energy saving
• When using your appliance, adjust the speed
settings according to vapour and odour intensity,
in order to save energy.
• Use low speeds (1-2) under normal conditions,
and high speed (3) and boost mode for intense
odour and vapour.
• The hood is equipped with lamps in order to illu-
minate the cooking area.
• Using them for environmental lighting shall
cause unnecessary energy expenditure and in-
sufficient lighting.
• For your device to consume less energy, run it at
a low speed level.
• Your device will reduce energy consumption as
it will run more efficiently when you provide suf-
ficient air intake to it.
• Set your device to the intense suction power
level before the formation of steam, in cases
where you know that the dense steam will occur.
So, you reduce energy consumption by using
your device for a shorter time as it will have a
sufficient air intake.
• Keep the lids of the cookware closed to reduce
the steam evolving.
3.5 Operation of the hood
• Your appliance contains a motor that has various
speeds.
• For better performance, we recommend using
low speeds under normal conditions and high
speeds in cases of strong odours and intense
vapour.
• You can start your appliance by pressing on the
desired speed setting button. (2,3,4)
• You can illuminate the cooking area by pressing
the lamp (13).
Cooker Hood / User Manual
3.6 Replacement of Lamp
MAX 3 W
(Figure 3)
Make the electrical connections of the appliance.
Your appliance uses 3W spot LED lamp. For rep-
lacing the lamps, push downwards on the holder
from its behind, turn it counter-clockwise, and take
it out downwards. Apply the above operation in re-
verse to install new lamps (Figure 3).
Bulb
Bulb power
Holder/Socket
Bulb voltage
Size
ILCOS Code
Luminous flux
Correlated colour
temperature
This product contains a light source of energy ef-
ficiency class "F".
3 W
GZ 10
220 - 240 V
53x50 mm
DR/F3-220-240-
GZ10-50-53
260 lm
3000 K
13 / EN