Teac AD-500 Manuel Du Propriétaire page 9

RANDOM Playback
1. Press the SHUFFLE button in the Stop
mode.
The SHUFFLE indicator lights in the
display.
2. Press the CD PLAY button.
Tracks will be randomly selected and
played back.
O Press the Æ button with the random
play function engaged to select a tune
at random. Press the Ú button to
replay the currently played tune from its
beginning.
O A tune cannot be replayed after it has
been played in this mode.
O To release the random play function
while it is engaged, press the SHUFFLE
button again. Tunes will play back in
their normal designated order, starting
from the currently played tune.
Repeat Function
The repeat function allows repeat
playback of any single tune, the entire disc,
or any desired portion on the disc
designated by two (start and end) points.
O The repeat functions can be released
by pressing the repeat button again.
∑ To repeat one tune
(Single Repeat mode)
1. Press the REPEAT 1/ALL button.
The REPEAT and SINGLE indicators
light.
2. Select the required tune by pressing
the ÚÆ button.
The selected tune is played, then when
the end of the tune is reached, the
player will return to the beginning of the
tune and playback starts again. In this
way, the selected tune will be played
back repeatedly.
∑ To repeat an entire disc
(All Repeat mode)
1. Press the REPEAT 1/ALL button twice.
The REPEAT and ALL indicators light.
2. Press the PLAY button.
Playback starts and, when the end of
the disc is reached, the player will
return to the beginning of the first tune,
and then playback
repeatedly.
_ 9 _
∑ To repeat a designated section
(A-B Repeat mode)
1. Start playback from any point before
the section to be designated.
2. Designate the point at which repeat
playback should start (point A) by
pressing the A-B button.
The REPEAT and A - indicators light and
the B indicator blinks to show that point
A has been entered.
3. When the portion at which repeat
playback should end is reached, press
the A-B button again to designate point
B.
The B indicator is changed to light
steadily to show that the A-B repeat
function has been activated.
The player automatically returns to
point A and restarts playback.
When play reaches point B, the player
returns to point A and starts playback
again, repeatedly.
O After designating point A, when quick
searching point B, use the Ò or Æ
button instead of playing back normally.
O When the A-B button is pressed again
during block repeat play, block repeat
playback will be released.
∑ Programmed repeat playback
The repeat function can be activated even
in the Programmed Playback mode.
continues
To repeat all the programmed tunes, press
the 1/ALL button twice. (At this time, check
that the REPEAT and ALL indicators light.)