Teac AD-500 Manuel Du Propriétaire page 10

Time Counter Display
The time counter shows various time
readouts, as follows.
1 Total disc playback time
After the disc tray is closed with a disc
loaded, the total disc playback time and
total number of tunes on the disc are
displayed.
2 Elapsed time display
When playback begins, the elapsed time
of the tune being played is displayed in
minutes and seconds.
3 Remaining time display (REMAIN)
Displayed when the TIME button is
pressed once. This provides an easy
check of the remaining time of the tune
being played.
4 Total remaining time display
(TOTAL REMAIN)
Displayed when the TIME button is
pressed twice. The time displayed is
the total remaining playback time from
the position being played, to the end of
the disc; the counter counts down to
"00:00" during playback.
O Displayed after the TIME button is
pressed three times. The time displayed
is the elapsed playback time 2.
O In Normal Playback mode, if a tune with
a number higher than 32 is being
played, the remaining time will not be
displayed in the time counter even
when the TIME button is pressed.
Instead, "nn:nn" will be indicated on the
time indicator.
Auto Spacing
When this function is activated, an interval
of approx. 4 seconds will be inserted
between tunes automatically, so they are
played back with a fixed spacing.
To activate this, press the AUTO SPACE
button so that the A.SPACE indicator lights
in the display.
When the auto space button is pressed
again, the indicator goes off and the auto
spacing function is released.
Intro Check Function
The intro check function allows only the
beginning of each track to be played for 10
seconds.
1. Press the INTRO CHECK button.
The INTRO and ∏ indicators will be
indicated.
2. Press the INTRO CHECK button again to
clear the intro check function.
O The intro check function also works
together with SHUFFLE, PROGRAM and
REPEAT ALL functions.
_ 10 _
Single Playback
1. Press the single button. The SINGLE
indicator will light in the display.
2. Press the Ú/Æ MUSIC SKIP
buttons corresponding to the required
tune.
3. A single tune will be played back, after
which the player will enter the stop
mode.
O To release the Single mode, press the
SINGLE button again.