Teac AD-500 Manuel Du Propriétaire page 7

CD Player
Basic Operation
1. Press the POWER switch.
2. Press the OPEN/CLOSE button.
The disc tray will slide out. Place the
disc gently on the tray with its label side
facing upward. The disc is set within
the disc guides at the center of the tray.
For 8 cm (3-inch) For 12 cm (5-inch)
CD singles Compact Discs
3. Press the OPEN/CLOSE button again.
The disc tray will close.
Several seconds later, the following
information is displayed.
Total number of Total playback
tunes on the disc time of disc
Tune numbers on disc up to 20
4. Press the CD PLAY (∏) button.
Disc playback starts from the first track,
and the ∏ (play) indicator will light.
O During playback, the number of the
currently played tune blinks on the
music calendar.
O When tunes have been played, their
numbers will disappear from the Music
Calendar display.
∑ Even if the disc tray is open ...
When the å button is pressed:
The disc tray will close and playback starts
from the first track.
∑ To stop playback
Press the STOP button. The player enters
the Stop mode.
To unload the disc:
Press the OPEN/CLOSE button; playback
stops and the disc tray will slide out, and
all functions are reset to their initial
settings.
To temporarily suspend playback (Pause
mode):
Press the ƒ button. Playback stops at the
current position and the ƒ indicator lights
steadily. To resume playback from the
same position, press the ∏ or ƒ button.
CAUTION :
O Do not force the tray by hand during
opening and closing operations.
_ 7 _
Music Search Operation
∑ Music search using MUSIC
SKIP buttons (Ú/Æ)
The beginning of any tune can be easily
located using the Ú/Æ MUSIC SKIP
buttons. This operation is indicated clearly
in the TRACK display.
O This operation is possible even in the
Program Playback mode. However,
only programmed tunes will be
detected.
∑ To skip to the next tune
Press the Æ button.
The player will skip ahead to the next tune
each time the Æ button is pressed. The
player can be advanced to the last tune
this way, but once the beginning of the last
tune is reached, the player will not
advance even if the Æ button is pressed.
∑ To skip back to the previous tune
Press the Ú button.
The player will skip back one tune each
time the Ú button is pressed. If this
button is pressed in the middle of a tune,
the player will skip back to the beginning of
the current tune. To make it skip back to
the previous tune, the button must be
pressed twice.
In this way, the player can be returned to
the beginning of the first tune on the disc.
∑ Music search using SEARCH
n
butto s (/Ò)
During playback or in the Pause mode,
hold down the Ò button of the remote
control or the Æ button of the main unit
to move the playing position quickly in the
forward direction, and hold down the 
button of the remote control or the Ú
button of the main unit to move quickly in
the reverse direction.
During the manual search operation, sound
will be audible but the output level will be
lowered. This lets you search for any
required portion while checking the sound.
When the desired position is reached,
release the button to reenter the previous
mode.
or