Honeywell 01919511 Mode D'emploi page 51

OPERATIOn
OFFSET TIME
Device menu
Enter
Offset time
11 Offset time
Prog
Setting:  
 
Selection:
Finish: Prog
Factory setting Offset time
Offset time: 0,0s 0,0 to 5,0 Seconds
An offset time can be configured for group, central, and automatic runs. This can be used to prevent the motors from all running at the same
time. When the offset time is set to one second, for instance, the first motor is switched ON, the next motor after one second, etc.!
Offset time
0.0s
GB
GB-17