Honeywell 01919511 Mode D'emploi page 45

OPERATIOn
MOTOR-TyPE
Device menu
M01
05 Motor-Type
Enter
Type:
Setting:  
 
Selection:
Finish: Prog
Prog
Factory setting Adjustm. time
Adjustment time: T: 0.5s 0 to 5 sec.
Motor-Type: Blind
Note: The compact module's outputs are suitable for the individual control of blinds, shutters, and awnings. The motor type can be set for each
output. The adjustment time (T) for the shutter defines the automatic adjustment of its slats when the sun sensor transmits an ON signal. The
adjustment time (T) for the awning serves to reduce the load while it is closing.
Motor 00-11 Motor-Type
T: 0.5s

M0
Enter
Blind Type:
Setting:  
Motor-Type
Shutter, Blind, Awning
Adjustment time
T: 0.5s T: 0.5s
M0
Enter
Blind
Type: Blind
Setting:  
Enter
GB
GB-11