Honeywell 01919511 Mode D'emploi page 46

OPERATIOn
GROuPS
Device menu
Enter
06 Groups
012 ------- -- --
Prog
Setting:  
 
Selection:
Finish: Prog
Factory setting
Group 0: Motor M0-M2 Group 2:
Group 1: Motor M3-M5 Central:
Note: The motors can be assigned separately to the groups. All motors in the central group are activated ex works.
GB-12
Group Assign. the motor
Group 0 Group 0
Enter
012 ------- -- --
Setting:  
Prog
Motor M6-M8
Motor M0-M11
Assign. the motor
Enter
Group 0
Enter
Motor
012 ------- -- 11
1-11
Setting:  