Publicité
Les langues disponibles
Les langues disponibles
14. Mount the sliding rail cap.
15. Dismantle the guide of the
refrigerator door.
16. Slide the guide onto the sliding rail
of the cabinet door, and slide it
against the side of the fridge door.
17. Screw the guides to the fridge door,
screw them hand tight. Now test if
the fridge door closes properly and
draws a vacuum. If this is not the
case, you can make the door close
properly by adjusting the guides.
Then screw the guides rmly.
18. Then mount the guide caps.
Wait at least four hours before
putting the plug into the socket; this
allows the oil to ow back to the
compressor.
14
3 15
16
17
18
17
Publicité
