Veripart VPIBKV122 Notice D'utilisation page 129

9. Close the door and slide the sliding
rail against the inside of the cabinet.
Keep 1 to 2 mm clearance between
the sliding rail and the cabinet.
10. Open the fridge door and place it
against the cabinet door (without
moving the sliding rail). Now mark
off the position of the sliding rail with
the pencil.
11. Now mark the screw holes of the
sliding rail on the door.
12. Create pilot holes using the bradawl.
13. Then screw the sliding rail to the
door panel.
9
1-2 MM
10
11
12
13
16