Resetting The Printer - Epson TM-L90-i Manuel De L'utilisateur

English
Running a Self-test
In self-test mode the printer will perform a series of internal diagnostics, and then provide a listing
of printer settings. 
Having a printed self-test in hand when calling for technical support can help speed the
troubleshooting process.
Use the following procedure to start a self-test.
1. Close the roll paper cover.
2. While pressing the Feed button on the control panel, turn on the printer. (Keep pressing the
Feed button until the printer starts printing.) 
The printer prints out the various printer states.
3. When all printer states have been printed, make sure that the following message is displayed and
the Paper LED flashes.
"If you want to continue SELF-TEST printing, please press Feed button."
The printer is now in the self test wait mode.
4. To start a test print, press the Feed button when the printer is in the self test wait mode.
5. Check that the following has been printed.
"*** completed ***"
This indicates that the printer has been initialized and made the transition to the normal mode.

Resetting the Printer

Certain error conditions can be reset by turning the printer off then back on.
Not all error conditions can be reset using this method. (U
"Troubleshooting" on page 18
)
17