Epson TM-L90-i Manuel De L'utilisateur page 20

TM-L90-i Specifications
.
Print method
Dot density
Print width
Paper dimensions
Normal /
LFC Full Coated
Paper type
LFC Lane Coated
Ethernet
VGA
USB (host)
Interface
USB (device)
micro SD card
Drawer kick
Power supply*
Current consumption
Normal /
LFC Full Coated
Temperature
LFC Lane Coated
Normal /
LFC Full Coated
Humidity
LFC Lane Coated
Overall dimensions
Weight (mass)
dpi: dots per 25.4 mm (dots per inch)
*1: 500 mA at maximum for one port. 600 mA at maximum for total of the two ports.
*2: Be sure to use a safety-standards-applied power source that meets the following specifications.
Rated output: 24 V, 2.0 to 10.0 A
Maximum output: 240 VA or less
20
80 mm paper width
Thermal line printing
203 dpi 203 dpi [dots per 25.4 mm {1"}]
72 mm {2.84"}, 576 dot
positions
79.5 ± 0.5  max. Ф102
mm
{3.13 ± 0.02  4"}
Thermal paper:
NTP080-80
Linerless label paper:
9023 - 0839 (12 roles)
Linerless label paper:
9023 –1274 (6 roles)
9023 –1253 (12 roles)
× 1
10BASE-T/100BASE-TX
do not use
× 2
USB 2.0, Type A
1
5 V, 500 mA*
× 1
USB 2.0 High speed, Type B
× 1
× 1
2
DC+24 V  7%
Approximately 1.8 A
Operating: 5 to 45°C {41 to 113°F}
Storage: –10 to 50°C {14 to 122°F} (except for paper)
Operating: 5 to 35°C {41 to 95°F}
Storage: –10 to 50°C {14 to 122°F} (except for paper)
10 to 90%
20 to 80%
140  203 148 mm {5.51  7.99 5.83 "} (W  D H)
Approximately 1.9 kg {4.19 lb}
58 mm paper width
52.5 mm {2.07"}, 420 dot 35 mm {1.38"}, 280 dot
positions positions
57.5 ± 0.5  max. Ф102 40.0 ± 0.5  max. Ф102
mm mm
{2.26 ± 0.02  4"} {1.57 ± 0.02  4"}
Thermal paper: Linerless label paper:
NTP058-80 9023-1055 (12 roles)
Linerless label paper: Linerless label paper:
9023 –1823 (12 roles) 9023 –1275 (6 roles)
9023 –1397 (30 roles) 9023 –1257 (12 roles)
English
40 mm paper width