Epson TM-L90-i Manuel De L'utilisateur page 12

!
CAUTION:
❏
When connecting external devices to the USB ports, follow the precautions below.
• Confirm the rated current of the external devices by checking the descriptions on the devices or manuals.
Connect the external devices only when those total rated current is less than 600 mA. Do not use a device
whose rated current is unclear.
• Use UL-approved external devices (only for North American users).
❏
When connecting the USB cables, pass the cables through the cable band to prevent them from
coming off.
❏
When using the printer, make sure the protective cover fits firmly into place.
❏
When Ethernet cables are installed outdoors, make sure devices without proper surge protection
are cushioned by being connected through devices that do have surge protection. Otherwise, the
devices can be damaged by lightning.
Note:
Q
Connecting the optional Wireless LAN Cable Set (OT-WL Series) to the USB port enables the wireless
LAN connection. While connecting via wireless LAN, keep the Ethernet cable unconnected to the
printer.
12
Cable band
English