Hillrom Allen A-70825 Instructions D'utilisation page 13

INSTRUCTIONS FOR USE
3 Equipment Setup and Use:
Prior to use:
a. Inspect the product looking for any visible damage or sharp edges that could
be caused by a drop or impact during storage.
b. Make sure product has been properly cleaned and disinfected and wiped dry
prior to each use.
c. Ensure enough room or Foam Block Stand to be fully supported by flat surface.
Setup:
a. Place Foam Block Stand on
head end of OR Table.
Note: Ensure face cutout is in
correct orientation.
b. Make sure Foam Head
Block Stand is centered.
Document Number: 80028182
Version E
Shown on OR Table Surface
Page 13
Issue Date: 26 MAR 2020
Ref Blank Template: 80025117 Ver. F