Accessories; Scope Of Supply - Cooper Hand Tools Weller WDD 81V Manuel D'utilisation

● Lock:
Locking the setpoint temperature. Settings cannot be changed after
the soldering station has been locked.
● °C/°F:
Switching the temperature display from °C to °F, and vice versa.
● Window:
Limitation of the temperature range to max. ±99 °C based on a locked
temperature resulting from the "LOCK" function. The locked temperatu
re represents the median point of the adjustable temperature range. For
units with a floating contact (optocoupler output) the "WINDOW" func
tion is used to adjust a temperature window. If the actual temperature
is within the temperature window the floating contact will be enabled
(optocoupler output).
● Cal:
Re-adjustment of the soldering station (WCB 2 only).
● PC interface:
RS232 (WCB 2 only).
● Temp. gauge: Integrated temperature gauge for thermal element Type K (WCB 2 only).

6. Accessories

5 13 500 99 Cleaning Tool
5 33 129 99 DS V 80 Desoldering Set UNC
5 13 191 99 DS 80 Desoldering Tool UNC
5 15 030 99 Holder AK 20
5 29 161 99 Soldering iron set WSP 80
5 33 111 99 Soldering iron set MLR 21
5 33 112 99 Soldering iron set LR 21, antistatic
5 33 113 99 Soldering iron set LR 82
5 33 155 99 Soldering iron set WMP
5 33 133 99 Soldering iron set WTA 50
5 13 050 99 Reflow soldering unit EXIN 5
5 27 028 99 Preheating plate WHP 80
5 25 030 99 Thermal insulating unit WST 20
5 31 181 99 External input unit WCB 1
5 31 180 99 External input unit WCB 2

7. Scope of supply

WDD 81V Power Unit
Control Unit Control Unit
DSX 80 Desoldering Set Mains Cable
Mains Cable 3.5 mm Jack
AK 20 Holder Operating Instructions
3.5 mm Jack Main Filter
Operating Instructions
Main Filter
Figure: Suction Nozzles, see page 68 +69
Figure: Circuit Diagram, see page 70
Figure: Exploded Diagram, see page 71 + 72 + 73.
Subject to technical change without notice!
29