DeWalt DW713 Traduction De La Notice D'instructions Originale page 30

E N G LI S H
MITRE SAW DW713, DW713XPS
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
E
product development and innovation make D
reliable partners for professional power tool users.
Technical Data
Voltage
(U.K. & Ireland only)
Type
Power input
Blade diameter
Max. blade speed
Max. cross-cut capacity 90°
Max. mitre capacity 45°
Max. depth of cut 90°
Max. depth of bevel cross-cut 45°
Mitre (max. positions)
Bevel (max. positions)
0° mitre
Resulting width at max. height 90 mm
Resulting height at max. width 90 mm
45° mitre
Resulting width at max. height 90 mm
Resulting height at max. width 90 mm
45° bevel
Resulting width at max. height 61 mm
Resulting height at max. width 161 mm
31.62° mitre, 33.85° bevel
Resulting height at max. width 133 mm
Automatic blade brake time
Weight
* DW713XPS with Worklight LED
L (sound pressure)
PA
K (sound pressure uncertainty)
PA
L (sound power)
WA
K (sound power uncertainty)
WA
Vibration total values (triax vector sum)
determined according to EN 61029-1, EN 61029-2-9:
Vibration emission value a
h
a
=
h
Uncertainty K =
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 61029
and may be used to compare one tool with another. It may be used for
a preliminary assessment of exposure.
WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level
over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job. This
may significantly reduce the exposure level over the total
working period.
28
All manuals and user guides at all-guides.com
WALT one of the most
E
DW713/DW713XPS
V 230
V 230/115
2
W 1600
mm 250
min 5000
-1
mm 162
mm 114
mm 90
mm 58
left 50°
right 50°
left 48°
right 48°
mm 95
mm 41
mm 67
mm 41
mm 95
mm 25
mm 20
s < 10.0
kg 15*
dB(A) 91.0
dB(A) 3.0
dB(A) 102.0
dB(A) 3.0
m/s² 2.6
m/s² 1.5
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of
work patterns.
Fuses
Europe 230 V tools
U.K. & Ireland 230 V tools
U.K. & Ireland 115 V tools
NOTE: This device is intended for the connection to a power supply
system with maximum permissible system impedance Zmax of 0.30 Ω
at the interface point (power service box) of user's supply.
The user has to ensure that this device is connected only to a power
system which fulfils the requirement above. If necessary, the user can
ask the public power supply company for the system impedance at the
interface point.
Defi nitions: Safety Guidelines
The definitions below describe the level of severity for each signal word.
Please read the manual and pay attention to these symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to personal
injury which, if not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
DW713/DW713XPS
D WALT declares that these products described under "technical data"
E
are in compliance with:
2006/42/EC, EN 61029-1, EN 61029-2-9.
These products also comply with Directive 2004/108/EC. For more
information, please contact D WALT at the following address or refer to
E
the back of the manual.
The undersigned is responsible for compilation of the technical file and
makes this declaration on behalf of D
Horst Grossmann
Vice President Engineering and Product Development
D WALT, Richard-Klinger-Straße 11,
E
D-65510, Idstein, Germany
29.12.2009
Safety Instructions
WARNING! When using electric tools basic safety
precautions should always be followed to reduce
the risk of fire, electric shock and personal injury
including the following.
10 Amperes, mains
13 Amperes, in plugs
16 Amperes, mains
WALT.
E