JVC KD-SH77 Manuel D'instructions page 7

2
1
Turn on the power and select the
source.
For KD-SH77
FM TUNER
or
AM TUNER
AUX INPUT
For KD-SH55
FM TUNER
or
AM TUNER
* If a CD is not in the loading slot, you cannot
select CD as the source to play.
** Without connecting the CD changer, you
cannot select it as the source to play.
*** ONLY for KD-SH55: To select the external
component, you have to change the external
component setting (see page 20).
To operate the tuner (FM or AM),
see pages 8 – 10.
To operate the CD player,
see pages 11 – 13.
To operate external components
(AUX INPUT and LINE INPUT),
see pages 24 – 25.
To operate the CD changer,
see pages 26 – 27.
EN07-07.KD-SH77_55[J]f
1
When you press the button
for the first time, the power
comes on. Then each time
you press the button, the
source changes as follows.
*
CD PLAY CD CHANGER
LINE INPUT
*
CD PLAY CD CHANGER
or
LINE INPUT
AUX INPUT
7
BASIC OPERATIONS
2
Adjust the volume.
**
Volume level indicator
**
Note:
*** After adjusting the volume, you can push in the
control dial to avoid unintended operations.
To use it again, push the control dial again to
make it come out.
3
Adjust the sound as you want.
(See page 14.)
To drop the volume in a moment
Press and hold
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press and
hold the button again.
• If you turn the control dial clockwise, you can
also restore the sound.
To turn off the power
Press and hold SOURCE
appears on the display.
Note:
When you use this unit for
the first time, set the built-in
clock correctly, see page 17.
To increase the volume.
To decrease the volume.
Volume level appears.
/ATT while listening to any
until "SEE YOU"
01.1.9, 4:31 PM
7