Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE GUIDE
AS REQUIRED
Check tire pressure.
Fill batteries to proper level and check specific gravity.
Wash battery tops free of dirt and electrolyte.
Remove and clean corroded wire terminals, battery terminals
and batteries. Reinstall wire terminals.
Use metal parts protector (Part No. 841192) to cover all elec-
trical connections and battery terminals.
NOTICE
•
Be sure to make all connections prior to
using the metal parts protector, since it will
coat all open surfaces.
EVERY 200 HOURS
Perform previous services
Lubricate chassis*
Check differential lube level (EP)
Check master cylinder fluid level ± use DOT 3 brake fluid
Description
BULBS
Headlight (accessory)
Light, Stop, Tail
GB-10
All manuals and user guides at all-guides.com
SAFETY, OPERATORS & MAINTENANCE MANUAL
CHASSIS LUBRICATION CHART
Perform every 200 hours
* Use a lithium based pressure gun grease on all
grease fittings and lubrication points.
CHASSIS LUBRICATION GUIDE
IMPORTANT
* TOW LINE ATTACHING POINTS
X JACKING LOCATIONS
BULBS
Specification or
35 Watt
(3000 CP)
32±4 CP
E-Z-GO XI 340 / CUSHMAN TUG
EVERY 1000 HOURS OR YEARLY
Perform previous services
Change differential lube (EP)
Clean and repack front wheel bearings (PG)
Check motor brushes
LUBRICATION CODE
PG ± Pressure gun grease
(lithium base)
EP ± Extreme pressure lube
SAE ± 80±90 Multigrade
BF ± Brake fluid DOT (3)
LUBRICATION AREA
1. Brake pedal pivot crank
2. Fork tube upper bushing & lower bearing 2
3. Fork pivot bushing
Trade No.
No. 4411
No. 1157
or
No. 2057
NUMBER OF
LUBRICATION POINTS
OR FITTINGS*
1
2
Cushman No.
820594
822049
Publicité
