DeWalt DW738 Mode D'emploi page 22

E N G L I S H
Basic saw cuts
Always position the blade guard approximately 10 mm above the surface
of the workpiece.
Ripping (fig. L)
• Install the rip fence as described above.
• Set the rip fence for the width of cut required by using the scale.
• Slowly feed the workpiece into the blade, keeping it firmly pressed onto
the table and against the fence. Allow the teeth to cut and do not force
the workpiece through the blade. The blade speed should be kept
constant.
Always use a push stick.
Always switch OFF the tool when work is finished and before
unplugging.
Bevel cuts (fig. M)
• Set the table to the required angle.
• Install the fence to the right of the blade.
• Proceed as for ripping.
Freehand cuts
Freehand cuts are performed without the help of a fence.
• Do not attempt to cut curves smaller than the blade will allow.
• Whenever possible, connect a dust extraction device designed in
accordance with the relevant regulations regarding dust emission.
Consult your dealer for further information on the appropriate accessories.
Maintenance
Your D WALT Power Tool has been designed to operate over a long
E
period of time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Lubrication
Your Power Tool requires no additional lubrication.
Cleaning
Keep the ventilation slots clear and regularly clean the housing with a soft
cloth.
Unwanted tools and the environment
Take your tool to an authorized D
disposed of in an environmentally safe way.
en - 5
All manuals and user guides at all-guides.com
WALT repair agent where it will be
E
GUARANTEE
• 30 DAY NO RISK SATISFACTION GUARANTEE •
If you are not completely satisfied with the performance of your
D WALT machine, simply return it within 30 days, complete as
E
purchased, to the point of purchase, for a full refund or exchange.
Proof of purchase must be produced.
• ONE YEAR FREE SERVICE CONTRACT •
If you need maintenance or service for your D
12 months following purchase, it will be undertaken free of charge at
an authorized D WALT repair agent. Proof of purchase must be
E
produced. Includes labour and spare parts for Power Tools. Excludes
accessories.
• ONE YEAR WARRANTY •
If your D WALT product becomes defective due to faulty materials or
E
workmanship within 12 months from the date of purchase, we
guarantee to replace all defective parts free of charge or, at our
discretion, replace the unit free of charge provided that:
• The product has not been misused.
• Repairs have not been attempted by unauthorized persons.
• Proof of purchase date is produced.
This guarantee is offered as an extra benefit and is additional to
consumers statutory rights.
For the location of your nearest authorized D
please use the appropriate telephone number on the back of this
manual.
WALT machine, in the
E
WALT repair agent,
E
15