Publicité
Les langues disponibles
Les langues disponibles
Package contents
The package contains:
1 Partly assembled machine
1 Allen key
1 Pin spanner
1 216 mm TCT saw blade
2 Coach bolts
1 Fence insert (with 2 screws)
2 Dust extraction nozzles
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories which may have
occurred during transport.
• Take the time to thoroughly read and understand this manual prior to
operation.
• Remove the saw from the packaging material carefully.
Description (fig. A1 & A2)
Your D
WALT Cross-Cut Mitre Saw has been developed for professional
E
applications. This high precision machine can be easily and quickly set to
crosscut, bevel, mitre, or compound mitre. Placing the workpiece on a
piece of wood will increase the capacities to 300 mm.
A1
1 ON/OFF-switch
2 Head lock up release lever
3 Carrying handle
4 Fixed upper guard
5 Outer flange
6 Blade bolt
7 Lower blade guard
8 Fence insert
9 Fixed table
10 Blade slot
11 Positive stop lever
12 Mitre clamping knob
13 Rotating table/mitre arm
14 Mitre scale
15 Fence
16 Upper dust extraction nozzle
A2
17 Lower dust extraction nozzle
18 Head lock up hook
19 Bevel clamp
20 Bevel scale
21 Bench mounting holes
22 Lock down button
23 Traverse bars
24 Traverse locking screw
Optional Accessories
A3
25 Table end plate
26 Support guide rails
27 Material support plate
28 Material clamp
29 Swivelling stop
30 Adjustable stand 760 mm (max. height)
31 Legstand
A4
32 Length stop for short workpieces (to be used with guide rails [26])
17
All manuals and user guides at all-guides.com
A5
31 Legstand
33 Roller table
Electrical safety
The electric motor has been designed for one voltage only. Always check
that the power supply corresponds to the voltage on the rating plate.
Mains plug replacement (U.K. & Ireland only)
• Should your mains plug need replacing and you are competent to do
• Disconnect the plug from the supply.
• Cut off the plug and dispose of it safely; a plug with bared copper
• Only fit 13 Amperes BS1363A approved plugs fitted with the correctly
• The cable wire colours, or a letter, will be marked at the connection
• Before replacing the top cover of the mains plug ensure that the cable
For 115 V units with a power rating exceeding 1500 W, we recommend to
fit a plug to BS4343 standard.
Using an extension cable
If an extension cable is required, use an approved extension cable suitable
for the power input of this machine (see technical data). The minimum
conductor size is 1.5 mm
When using a cable reel, always unwind the cable completely.
Also refer to the table below.
Conductor size (mm
0.75
1.00
1.50
2.50
4.00
Voltage
230
this, proceed as instructed below. If you are in doubt, contact an
authorized D
WALT repair agent or a qualified electrician.
E
conductors is dangerous if engaged in a live socket outlet.
rated fuse (1).
points of most good quality plugs. Attach the wires to their respective
points in the plug (see below). Brown is for Live (L) (2) and Blue is for
Neutral (N) (4).
restraint (3) is holding the outer sheath of the cable firmly and that the
two leads are correctly fixed at the terminal screws.
Never use a light socket.
Never connect the live (L) or neutral (N) wires to the earth pin
marked E or
.
2
.
2
)
Cable rating (Amperes)
6
10
15
20
25
Cable length (m)
7.5
Amperes
Cable rating (Amperes)
0 -
2.0
6
2.1 -
3.4
6
3.5 -
5.0
6
5.1 -
7.0
10
7.1 - 12.0
15
12.1 - 20.0
20
E N G L I S H
15
25
30
45
60
6
6
6
6
6
6
6
6
6
6
6
6
6
10
15
10
10
10
15
15
15
15
15
20
20
20
20
20
25
-
en - 3
Publicité
