DeWalt DW700 Mode D'emploi page 21

CROSS-CUT MITRE SAW DW700
Congratulations!
You have chosen a D WALT product. Years of experience, thorough
E
product development and innovation make D
reliable partners for professional users.
Table of contents
Technical data
EC-Declaration of conformity
Safety instructions
Package contents
Description
Electrical safety
Mains plug replacement
Using an extension cable
Assembly
Adjustment
Instructions for use
Transporting
Maintenance
Guarantee
Technical data
Voltage
(U.K. & Ireland only)
Motor power (input)
Motor power (output)
Blade diameter
Blade bore
Max. blade speed
Mitre (max. positions)
Bevel (max. position)
Compound mitre
Capacities
cross-cut 90°
mitre 45°
bevel 45°
Overall dimensions
Weight
Fuses:
Europe 230 V tools
U.K. & Ireland 230 V tools
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Sharp edges.
15
All manuals and user guides at all-guides.com
WALT one of the most
E
en - 1
en - 1
en - 2
en - 3
en - 3
en - 3
en - 3
en - 3
en - 4
en - 4
en - 5
en - 7
en - 7
en - 7
DW700
V 230
V 230/115
W 1,200
W 800
mm 216
mm 30
min -1 7,000
left and right 45°
left 45°
bevel 45°
mitre 45°
mm 254 x 52
mm 175 x 52
mm 254 x 40
mm 540 x 440 x 360
kg 12.5
10 Amperes, mains
13 Amperes, in plugs
EC-Declaration of conformity
DW700
D WALT declares that these Power Tools have been designed in
E
compliance with: 89/392/EEC, 89/336/EEC, 73/23/EEC, EN 50144,
EN 55104, EN 55014, EN 61000-3-2 & EN 61000-3-3.
For more information, please contact D
or refer to the back of the manual.
Level of sound pressure according to 86/188/EEC & 89/392/EEC,
measured according to EN 50144:
L (sound pressure)
pA
L (acoustic power)
WA
* at the operator's ear
Take appropriate measures for the protection of hearing if the
sound pressure of 85 dB(A) is exceeded.
Weighted root mean square acceleration value according to EN 50144:
TÜV Rheinland
Sicherheit und Umweltschutz GmbH
Am Grauen Stein
D-51105 Köln
Germany
Director Engineering and Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 40,
E
D-65510, Idstein, Germany
E N G L I S H
WALT at the address below,
E
DW700
dB(A)* 90.6
dB(A) 98.6
DW700
< 2.5 m/s 2
Cert. No.
AM 9511299 01
en - 1