Publicité
Les langues disponibles
Les langues disponibles
Menu Operations
Set up for Watching Image Software (Video Menu Mode Only)
This unit has a function which allows you to project movies, which were recorded on film, in the best possible conditions.
(Function to convert 2-3 pull-down interlace scans to progressive scans)
Normally use set to AUTO.
1
Press the MENU button.
The main menu appears on the screen.
2
Select "Set up" with the cursor button 5 or ∞, and press 3 or the ENTER button.
The "Set up 1" submenu appears on the screen.
3
Select "Set up 2" with the cursor button 5 or ∞, and press 3 or the ENTER button.
The "Set up 2" submenu appears on the screen.
4
Select "Deinterlace" with the cursor button 5 or ∞.
5
Select the Deinterlace function mode with the cursor button 2 or 3.
Video: When watching images recorded with a video camera
Film:
When watching images recorded on film
AUTO: The setting is changed automatically
6
Press the EXIT button to return to the previous menu or press the MENU button to
exit the menu mode.
Note
• Operates when the signal is an NTSC or PAL interlace signal. Does not operate for other signals. (The menu is not
displayed when other signals are inputted.)
48
All manuals and user guides at all-guides.com
Publicité
