Publicité
Les langues disponibles
Les langues disponibles
Changing the Color System (Video Menu Mode Only)
This function is available only in Video menu mode.
The menu is only displayed when there is a signal for the AV IN (Y/C, VIDEO and COMP) terminal.
Normally, use the color system in AUTO. If operation in AUTO is unstable, such as color not being shown, set to a dedicated
color system in accordance with the color system of the video signal being input.
1
Press the MENU button.
The main menu appears on the screen.
2
Select "Set up" with the cursor button 5 or ∞ ∞ ∞ ∞ , and press 3 3 3 3 or the ENTER button.
The "Set up 1" submenu appears on the screen.
3
Select "Decoder" with the cursor button 5 or ∞ ∞ ∞ ∞ , and press the ENTER button.
The "Decoder" submenu appears on the screen.
Video submenus
Set up 1
Position
Gamma
Aspect ratio
Decoder
Page 2
4
Set the color system with the cursor button 5 or ∞ ∞ ∞ ∞ .
AUTO:
Normally, set to "AUTO". (Factory set value)
The color system of a video signal being input is automatically identified and displayed in [ ].
In [ ], B/W (Black & White), NTSC, NTSC4.43, PAL or SECAM will be displayed. (It is not always displayed.)
For example, AUTO [ NTSC ] shows that the NTSC signal is being received.
NTSC:
Dedicated to NTSC.
NTSC4.43:Dedicated to NTSC4.43.
PAL:
Dedicated to PAL.
SECAM:
Dedicated to SECAM.
5
Press the EXIT button to return to the previous menu or press the MENU button to
exit the menu mode.
All manuals and user guides at all-guides.com
ENTER
Down
Cinema
Up
4:3
16:9
ENTER
ENTER
ENTER
Decoder
AUTO [ NTSC ]
NTSC
NTSC4.43
PAL
SECAM
EXIT
Menu Operations
45
Publicité
