Arcam FMJ AV8 Mode D'emploi page 39

SETUP COMMANDS – ADVANCED
Advanced Speaker
Command Parameters Description
BAS BASsy Bass Levels
TRB TRBsy Treble Levels
STB STBx Auto Stereo Tone Bypass
Advanced Video
Command Parameters Description
OSD zOSDx OSD
VIA VIAi Video Input AUX
VIC VICi Video Input CD
VIT VITi
Video Input Tape
VIM VIMi Video Input Multichannel
ANV ANVy Audio and Video
HQS HQSyi HQ Video Setting
Advanced Digital
Command Parameters Description
DIG DIGyi Digital Inputs
Advanced zone 2
Command Parameters Description
FVL FVLx Zone 2 Fix Volume
SBY zSBYy Standby
CZI CZIx
Zone 1 Control
ACC ACCix Zone 2 Access
Advanced Analogue
Command Parameters Description
ANS ANSiy Analogue Settings
Save Settings
Command Parameters Description
SAV SAVy Save Preset
PNM PNMyn Preset Name
All manuals and user guides at all-guides.com
Parameter values
y may have a value in the range -6 to +6:
-6 = –6dB
+6 = +6dB
y may have a value in the range -6 to +6:
-6 = –6dB
+6 = +6dB
Parameter values
y may have the values 0 to 1, as follows:
0 = Tracked, 1 = Separate.
y may have the values 0 to 2, as follows:
0 = HQ Vid 1, 1 = HQ Vid, 2 = HQ Vid 3.
Parameter values
y may have the values 0 to 6; i=1 (for digital input) or i=2 (for source assigned).
Parameter values
y may have the values 0 to 1, as follows:
0 =Local Only, 1 = All Off.
0 =None, 1 = All.
Parameter values
y may have the values 0 to 3, as follows:
0 = Low 0.5V, 1 = Medium 1V, 2 = Reference 2V, 3 = High 4V.
Parameter values
y may have the values 0 to 5, as follows:
0 = Current Preset, 1 = Preset 1, 2 = Preset 2, 3 = Preset 3, 4 = Preset 4, 5 =
Preset 5.
y may have the values 0 to 5, as follows:
0 = Current Preset, 1 = Preset 1, 2 = Preset 2, 3 = Preset 3, 4 = Preset 4, 5 =
Preset 5, n = up to 14 characters.
E-39