Publicité
Les langues disponibles
Les langues disponibles
Configuring the AV8
The AV8 'Setup Menu' has six 'Basic' and five 'Advanced' menu screens
which take you through the configuration process. The 'Basic' menus
enable you to match your AV8 to your speakers.The 'Advanced' menus
allow you to optimise the operation of your system. Screen shots of
these menus are shown in shaded boxes on the following pages.
The best way to set up the AV8 is using the on-screen display (OSD).
To view the OSD for the initial set up, use the composite video output
because the high quality video output has several display modes, and
may be incompatible with your high quality display device in its default
configuration.
The AV8 defaults to the NTSC video standard – most display devices
can sync to this automatically. For PAL-only display devices, press and
hold the
button for two seconds, when the AV8 will change to the
OK
PAL video standard. As soon as a video signal is input to the AV8, it
automatically detects which standard it is and switches to it.
ENTERING SETUP MODE
To enter the Setup menus press and hold the
remote control, or on the front panel, for at least two seconds. The
'Setup Menu Index' is displayed on your display device.
Unstable OSD menu display?
Your AV8 may be in the wrong video standard mode. Press and hold
the
button for more than two seconds to switch between the
OK
NTSC and PAL standard OSD mode.
SETUP LOCK
To prevent tampering with the AV8 setup configuration you can 'lock'
the menus by pressing the
,
OK
TUNER
on the front panel.To unlock the AV8, press the same buttons again.
SETUP MENU
The main 'Setup Menu' page allows you instant access to six 'Basic' and
five 'Advanced' menus.
Setup Menu Index
Basic
1.General
2.Speaker Size 2.Video
3.Delays
4.Level Set
5.Sub Woofer
6.THX
Save Setup
They are listed side-by-side on the OSD on your display device. The
selected line of the menu is also displayed on the front panel of the
AV8. Use the remote control navigation button
the menu heading, or use the navigation buttons to scroll down the list
to a specific page, then press
to go directly to the page.
OK
Save Setup takes you to the 'Save Settings' screen to allow you to
save in one of the five available presets.
Exit Setup exits the Setup menus without saving any changes.
Each of the following sections shows the screen that is displayed as you
move through the menus.
All manuals and user guides at all-guides.com
button on the
MENU
and
buttons simultaneously
DVD-A
Advanced
1.Speaker EQ
3.Digital
4.Zone 2
5.Input Trim
Exit Setup
to go to page 1 from
4
E-10
NAVIGATING USING THE REMOTE CONTROL
There are two ways to navigate through the Setup menus using the
remote control. The first method is for use when setting up the AV8
for the first time and allows you to progress methodically through the
menus:
1.
Press and hold the
MENU
under the navigation buttons) for two seconds to access the
'Setup Menu Index'.
NOTE: Just briefly pressing the menu button takes you to
'Main Menu Screen1'.
2.
Navigate between menus using the
must be highlighted).
3.
Navigate up and down the menu lines using the
4.
Cycle through the options and select the required setting using
the
keys.
34
Return to the title bar and repeat sequences 2 to 4, working through
the six 'Basic' menus and the five 'Advanced' menus as required.
5.
Press the
button to return to the main Setup menu
MENU
screen.
6.
Press the
button twice to select 'Save Setup' and save the
OK
settings.This takes about four seconds.Then press
to return to the Index, then exit the Setup menu.
A second method can be used when you need to make adjustments
to a specific menu screen:
1.
Press and hold the
MENU
'Setup Menu Index'.
2.
Navigate up and down the 'Setup Menu Index' using
pressing
to go to the selected menu option.
OK
3.
Use
56
to navigate up and down the menu lines.
4.
Use
to cycle through the options and select the required
34
setting.
5.
Press
to return to the main setup menu screen.
MENU
6.
Press the
button twice to select 'Save Setup' and save the
OK
settings.This takes about four seconds.Then press
to return to the Index, then exit the Setup menu.
NOTE: It is always possible to navigate between menus using the title
bar at the top of each menu page.
NAVIGATING USING THE FRONT PANEL
The AV8 front panel controls can be used to configure the options.
Please note that it is easier to configure using the remote control.
1.
Press and hold the
MENU
Setup menu.
2.
Navigate up and down the 'Setup Menu Index' menu using
pressing
to go to the selected menu option.
OK
3.
Use
56
to navigate up and down the menu lines.
4.
Use
to cycle through the options and select the required
34
setting.
Return to the title bar and repeat sequences 2 to 4, working through
the six 'Basic' menus and the five 'Advanced' menus as required.
5.
Press
to return to the main setup menu screen.
MENU
6.
Press the
button twice to select 'Save Setup' and save the
OK
settings.This takes about four seconds.Then press
to return to the Index, then exit the Setup menu.
E-10
button (which is located immediately
keys (the menu heading
34
keys.
56
twice again
OK
button for two seconds to access the
56
twice again
OK
button for two seconds to access the
56
twice again
OK
,
,
Publicité
