Technical Data; Noise/Vibration Information; Dust/Chip Extraction - Bosch PSM 80 A Notice Originale

(1) On/off switch
(2) Complete dust box (Microfilter system)
(3) Sanding plate
a)
(4) Sanding sheet
(5) Handle (insulated gripping surface)
(6) Extraction outlet

Technical data

Multi sander
Article number
Rated power input
No-load speed
No-load orbital stroke rate
Sanding sheet surface
Orbit diameter
Weight according to EPTA Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.

Noise/Vibration Information

Noise emission values determined according
to EN 62841-2-4.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 83 dB(A); sound power
level 94 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 62841-2-4:
2 2
a = 6.5 m/s , K = 1.5 m/s ,
h
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Bosch Power Tools
(7) Filter element (Microfilter system)
(8) Dust extraction hose
(9) Dust extraction adapter
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
PSM 80 A
3 603 C54 0..
W
-1
min 13,000
-1
min 26,000
2
cm 104
mm
kg 0.90
Assembly
Pull the plug out of the socket before carrying out any
u
work on the power tool.

Dust/Chip Extraction

The dust from materials such as lead paint, some types of
wood, minerals and metal can be harmful to human health.
Touching or breathing in this dust can trigger allergic reac-
tions and/or cause respiratory illnesses in the user or in
people in the near vicinity.
Certain dusts, such as oak or beech dust, are classified as
carcinogenic, especially in conjunction with wood treatment
additives (chromate, wood preservative). Materials contain-
ing asbestos may only be machined by specialists.
– Use a dust extraction system that is suitable for the ma-
terial wherever possible.
– Provide good ventilation at the workplace.
– It is advisable to wear a P2 filter class breathing mask.
The regulations on the material being machined that apply in
the country of use must be observed.
Avoid dust accumulation at the workplace. Dust can
u
easily ignite.
Self-generated dust extraction with dust box (see figures
A1–A4)
Place the dust box (2) onto the extraction outlet (6) until it
clicks into place.
To empty the dust box (2), pull the dust box downwards.
Before opening the dust box (2), knock the dust box against
a firm surface as shown in the figure to loosen the dust from
the filter element.
English | 11
a)
a)
PSM 100 A
3 603 CB7 0..
80 100
13,000
26,000
104
1.4 1.4
0.90
/ II
1 609 92A 68S | (15.03.2021)
/ II