Product Features; Technical Data; Dust/Chip Extraction - Bosch GSS 140 A Professional Notice Originale

All manuals and user guides at all-guides.com
OBJ_DOKU-13281-001.fm Page 8 Thursday, June 12, 2008 3:32 PM
8 | English

Product Features

The numbering of the product features refers to
the illustration of the power tool on the graphics
page.
1 Dust bag
2 Sanding plate
3 Sanding-sheet clamp
4 Sanding sheet
5 Release button for front clamping bracket
6 Front clamping bracket
7 On/Off switch
8 Outlet piece
9 Extraction adapter*
10 Vacuum hose*
11 Perforating tool*
*The accessories illustrated or described are not in-
cluded as standard delivery.

Technical Data

Orbital sander
Article number
Rated power input
No-load speed rpm
No-load orbital stroke rate opm
Orbit diameter mm
Sanding sheet dimen-
sions
— Adhesion via
Velcro backing mm
— Attachment via
clamping mm
Sanding plate dimensions mm
Weight according to
EPTA-Procedure 01/2003 kg
Protection class
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltages and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your power tool. The trade names of individual tools may
vary.
1 609 929 N39 | (12.6.08)
Assembly
Before any work on the power tool itself,
pull the mains plug.

Dust/Chip Extraction

Dusts from materials such as lead-containing
coatings, some wood types, minerals and
metal can be harmful to one's health. Touch-
ing or breathing-in the dusts can cause aller-
gic reactions and/or lead to respiratory infec-
tions of the user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in con-
nection with wood-treatment additives (chro-
mate, wood preservative). Materials contain-
ing asbestos may only be worked by
specialists.
– Use dust extraction whenever possible.
– Provide for good ventilation of the working
place.
– It is recommended to wear a P2 filter-class
respirator.
GSS 140 A
Observe the relevant regulations in your coun-
Professional
try for the materials to be worked.
0 601 297 0..
External Dust Extraction (see figure A)
W 180
Slide the extraction adapter 9 onto the outlet
12000
piece 8. Ensure that the latching levers of the ex-
24000
traction adapter engage. The extraction adapter
1.6
9 accepts a vacuum hose with a diameter of
19 mm.
For removal of the extraction adapter 9, press
the latching levers together at the rear and pull
115 x 107 the extraction adapter off.
The vacuum cleaner must be suitable for the ma-
115 x 140
terial being worked.
113 x 105
When vacuuming dry dust that is especially detri-
mental to health or carcinogenic, use a special
vacuum cleaner.
1.4
/ II
Integrated Dust Extraction with Dust Bag
(see figure B)
For small sanding jobs, a dust bag 1 (accessory)
can be connected. Attach the sleeve of the dust
bag firmly onto the outlet piece 8. To maintain
optimum dust collection, empty the dust bag 1 in
good time.
Bosch Power Tools