Product Description And Specifications; Intended Use; Product Features - Bosch 0 607 350 198 Mode D'emploi

OBJ_BUCH-1326-002.book Page 16 Wednesday, August 7, 2013 8:59 AM
16 | English
 Wear close-fitting gloves. The flow of compressed air
makes the handles of pneumatic tools cold. Warm hands
are less sensitive to vibrations. Loose fitting gloves can be
caught by rotating parts.
 If you notice that the skin of your fingers or hands be-
comes numb, tingles, hurts or turns white, stop work-
ing with the pneumatic tool, notify your employer and
consult a physician.
 Hold the pneumatic tool with a not too firm yet secure
grip, compliant with the required hand-reaction forces.
The vibrations can be intensified the firmer you hold the
tool.
 When universal rotary couplings (bayonet couplings)
are being used, retaining pins are required. Use Whip-
check hose restraints to protect against failed hose
connections or the connection between hose and pneu-
matic tool.
 Never carry the pneumatic tool by the hose.
Symbols
The following symbols could have a meaning for the use of
your pneumatic tool. Please take note of the symbols and
their meaning. The correct interpretation of the symbols will
help you to use the pneumatic tool in a better and safer man-
ner.
Symbol Meaning
 Before installing, operating, repair-
ing, maintaining and replacing ac-
cessories as well as prior to working
near by the pneumatic tool, please
read and observe all instructions.
Failure to follow the following safety
warnings and instructions may result in
serious injury.
W Watt
Nm Newton metre
kg Kilogram
lbs Pounds
mm Millimetre
min Minutes
s Seconds
Revolutions or motions
-1
min
per minute
bar bar
psi pounds per square inch
l/s Litres per second
cfm cubic feet/minute
dB Decibel
3 609 929 C71 | (7.8.13)
Symbol
QC

UNF
G
NPT
Product Description and Specifica-
tions
While reading the operating instructions, unfold the fold-out
page with the illustration of the pneumatic tool and leave it
open.

Intended Use

The pneumatic tool is intended for dry sanding of wood, plas-
tic, metal, filler and varnished surfaces.

Product Features

The numbering of the product features refers to the illustra-
tion of the pneumatic tool on the graphics page.
1 On/Off switch
2 Air outlet with silencer
3 Connection socket at air intake
4 Hose fitting
Power output
5 Speed regulator
Unit of energy (torque)
6 Extraction hood
7 Open-end spanner (21 mm)
Mass, weight
8 Washer
Length
9 Sanding plate
10 Sanding sheet*
Time period, duration
11 Dust extraction
12 Clutch*
No-load speed
13 Hose clamp*
14 Supply-air hose*
Air pressure
15 Exhaust-air hose*
*Accessories shown or described are not part of the standard de-
Air consumption
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Unit of relative loud-
ness
Meaning
Quick-change chuck
Symbol for hexagon
socket
Tool holder
Symbol for external drive
US fine thread
(Unified National Fine
Thread Series)
Whitworth thread
Connecting thread
National pipe thread
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Bosch Power Tools