Product Description And Specifications; Technical Data; Dust/Chip Extraction - Bosch GSS 2300 Professional Notice Originale

All manuals and user guides at all-guides.com
OBJ_BUCH-2350-002.book Page 6 Tuesday, March 3, 2015 9:49 AM
6 | English
Safety Warnings for Sander
 Hold power tool by insulated gripping surfaces, be-
cause the belt may contact its own cord. Contact a "live"
wire may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
 Use the machine only for dry sanding. Penetration of wa-
ter into the machine increases the risk of an electric shock.
 Caution, fire hazard! Avoid overheating the object be-
ing sanded as well as the sander. Always empty the
dust collector before taking breaks. In unfavourable
conditions, e. g., when sparks emit from sanding metals,
sanding debris in the dust bag, micro filter or paper sack
(or in the filter sack or filter of the vacuum cleaner) can
self-ignite. Particularly when mixed with remainders of var-
nish, polyurethane or other chemical materials and when
the sanding debris is hot after long periods of working.
 Secure the workpiece. A workpiece clamped with clamp-
ing devices or in a vice is held more secure than by hand.
 Do not touch moving metal parts, especially the sand-
ing plate, when the sander is switched on.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The machine is intended for dry sanding of wood, plastic, filler
and coated surfaces.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 On/Off switch
2 Lock-on button for On/Off switch
3 Rear clamping lever
4 Rear clamping bracket
5 Sanding plate
6 Front clamping lever
1 609 92A 10D | (3.3.15)
7 Sanding sheet
8 Front clamping bracket
9 Handle (insulated gripping surface)
10 Screws for sanding plate
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Orbital sander
Article number
Rated power input W
No-load speed min
No-load orbital stroke rate min
Orbit diameter mm
Sanding sheet dimensions
— Attachment via clamping mm
Sanding plate dimensions mm
Weight according to
EPTA-Procedure 01/2003 kg
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Assembly
 Before any work on the machine itself, pull the mains
plug.

Dust/Chip Extraction

 Dusts from materials such as lead-containing coatings,
some wood types, minerals and metal can be harmful to
one's health. Touching or breathing-in the dusts can cause
allergic reactions and/or lead to respiratory infections of
the user or bystanders.
Certain dusts, such as oak or beech dust, are considered
as carcinogenic, especially in connection with wood-treat-
ment additives (chromate, wood preservative). Materials
containing asbestos may only be worked by specialists.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the mate-
rials to be worked.
 Prevent dust accumulation at the workplace. Dusts can
easily ignite.
Replacing the Sanding Sheet
When attaching a new sanding sheet, remove any dust or de-
bris from the sanding plate 5 (e. g. with a brush).
GSS 2300
3 601 B98 0..
190
-1
12000
-1
24000
2.0
93 x 230
92 x 182
1.5
/II
Bosch Power Tools