Zodiac T3 Instructions D'installation page 9

2.4 I Hydraulic connections
Stop the filter pump.
•
Clean the skimmer strainer, the filter pump pre-filter and the filter where necessary.
•
2.4.1 Connecting to the suction port
2.4.2 Connecting to the skimmer
Tip: Protect the filtration system by connecting the automatic flow regulation valve
This valve is used to adjust the flow rate and optimise the cleaner's cleaning efficiency; it also helps to retain
any debris that may have been aspirated and that could cause damage to the filtration equipment.
: Hose section
: Automatic flow regulation valve
: Suction port
: Valve cuff
: Hose section
: 45° elbow
: Skimmer
: Automatic flow regulation valve
: Valve cuff
EN
7