Zodiac T3 Instructions D'installation page 10

2.4.3 Connecting the Cyclonic™ Leaf Catcher (available as an optional extra)
• Connect the leaf catcher to the hose the closest to the suction line or skimmer (see image
• Orient the leaf catcher as instructed: "PUMP" = filter pump side / "CLEANER" = cleaner side (see image
• For optimum operation, position the leaf catcher vertically to the water's surface (see image
Connecting to the suction port
Tip: Protect the filtration system by connecting the Cyclonic
The leaf catcher is used to retain debris before it is aspirated into the filtration system, which could cause
damage to the equipment in the long term. It is also used to remove debris more easily than from the pump's
pre-filter, and has the advantage of being transparent for easily determining when it requires cleaning.
2.4.4 Testing and adjusting the flow rate
Before installing the cleaner, test and adjust the flow rate to determine the ideal flow rate.
To do this, hold the hose under water and clip the flow switch onto the quick connector (see image
Start the pump.
8
or
Connecting to the skimmer
Vertical position
).
).
Direction of connection
TM
Leaf Catcher
).
).