Zodiac T3 Instructions D'installation page 17

4.3.3 Reassembling the diaphragm
• Clip the diaphragm inside the internal output hose (see image
• Insert the internal output hose and the diaphragm into the cartridge. Align the diaphragm with the notches and pull
in a straight line (do not twist) until the edge of the diaphragm is visible (see image
• Screw the external output hose onto the cartridge and tighten (see image
• For the T3 / R3 / B3 models, check that the seal is still in place inside the nut. Insert the cartridge inside
the body of the cleaner, slide the clamping nut above the external output hose and tighten (see image
For the T5 Duo model, insert the cartridge into the body of the cleaner and tighten the nut (see image
• Check that the external output hose pivots freely by rotating it (see image
Internal output
hose
Diaphragm edge
T3 / R3 / B3
Diaphragm
or
T5 Duo
).
and
).
).
Cartridge
Cartridge
External output
hose
or
T3 / R3 / B3
).
).
).
Notch
Tab
Diaphragm
EN
T5 Duo
15