Kaco blueplanet 3.0 NX1 M2 Guide Rapide D'installation page 4

1 Installation
1.1 Safety
Before using the product for the first time, please read through the safety instructions carefully.
DANGER
Lethal voltages are still present in the connections and cables of the device even after the device has
been switched off and disconnected!
Coming into contact with the lines and/or terminals/busbars in the device can cause serious injury or death.
› Do not open the device.
› The device must be mounted in a fixed position before being connected electrically.
› Comply with all safety regulations and current technical connection specifications of the responsible
power supply company.
› The device is only permitted to be opened, installed and commissioned by authorised electricians.
› Switch off the grid voltage by turning off the external circuit breakers.
› Check that all AC and DC cables are completely free of current using a clip-on ammeter.
› Do not touch the cables and/or terminals/busbars when switching the device on and off.
› Keep the device closed when in operation.
1.2 Scope of delivery
Article
A
B
C
D
E
F
G
A
F
Check the equipment included
1. Inspect the device thoroughly.
2. Immediately notify the shipping company in case of the following:
- Damage to the packaging that indicates that the device may have been damaged.
- Obvious damage to the device.
3. Send a damage report to the shipping company immediately.
4. The damage report must be received by the shipping company in writing within six days following receipt of the
device. We will be glad to help you if necessary.
Page 1 KACO blueplanet 3.0 NX1 M2 KACO blueplanet 3.7 NX1 M2 KACO blueplanet 4.0 NX1 M2 KACO blueplanet 5.0 NX1 M2
Description
Inverter
Wall mounting bracket
Mounting accessory kit:
Wall fixings and hex bolts (3×)
M4×10 mm screw (4×)
DC plug connector
AC connector
WLAN
Documentation
B
G
Quantity
1 piece
1 piece
1 set
2 pairs
1 piece
1 piece
1 set
C D E