Model Description; Model Designation - Hatco FSHC-6W Série Manuel D'installation Et D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MODEL DESCRIPTION

All Models
The Flav-R-Savor
Portable Holding Cabinet is constructed of
®
sturdy stainless steel and powdercoat painted top, sides and
back. It features thermostatically-controlled heat, low velocity
convected air, a humidity system, and a large aluminum framed
tempered glass door (heavy-duty insulated stainless steel door
also available for FSHC-6W1 model). The access door can be
hinged left or right, depending on the application. Controls are
easily accessible and include a POWER ON/OFF (I/O) switch
and a digital temperature display. The unit is made portable by
using 4" (102 mm) casters—the front two being swivel casters
with wheel locks. Units come standard in silver gray and are
available in optional stainless steel, and can be configured
without a humidity system. an attached 6' (1829 mm) power
cord and plug is standard.
a stacking option is available to allow the placement of one unit
on top of another. Refer to the OPTIONS aND aCCESSORIES
section for details on all available options.
FSHC-6W1 Model
The FSHC-6W1 is a single door model made to fit under lower
work counters. The cabinet is equipped with six pairs of angle
pan shelves. These pan shelves are designed to hold full size
sheet pans, several steam table pan sizes (full, half, and third),
and Gastronorm pans.
a non-humidified model is also available. Non-humidified units
come with a heavy-duty, vented stainless steel door and a four
shelf rack. The non-humidified model is for countertop mounting
only and is shipped without casters or legs.
FSHC-6W2 Model
The FSHC-6W2 has all the features of the FSHC-6W1, but is
equipped with two doors for pass through operation.
FSHC-6W1 model

MODEL DESIGNATION

Full Size Sheet Pan Capacity
F S H C - X W - X
Flav-R-Savor
Holding Cabinet
FSHC-7-1 Models
The FSHC-7-1 is a single door model. The cabinet is equipped
with seven pairs of angle pan shelves. These pan shelves are
designed to hold full size sheet pans, several steam table pan
sizes (full, half, and third), and Gastronorm pans.
FSHC-7-2 Models
The FSHC-7-2 has all the features of the FSHC-7-1, but is
equipped with two doors for pass through operation.
FSHC-7-1 model
Number of Doors
W = Wide Cabinet Capacity
No Character = Standard Width
4
English
Form No. FSHC67m-0714

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Fshc-7 sérieFshc-6w1Fshc-6w2Fshc-7-1Fshc-7-2Flav-r-savor fshc-6w série ... Afficher tout

Table des Matières