Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
14
C
3
Attach the juicer drum on the toolholder.
C
4
Insert the pulp sieve into the juicer drum
and ensure that all 3 pins fit into the
notches of the juicer drum.
C
1
5
Put the lid of the juice extractor on the
bowl.
2
C
6
Select the maximum speed (position 2) to
obtain optimal results.
Never use the juicing accessory if the rotating
sieve or drum is damaged.
C
7
Drop the fruit or vegetables in the juice
extractor through the feed tube.
C
8
Press the ingredients firmly down with the
pusher if necessary. Keep the pusher in the
feed tube as much as possible to avoid
splashing.
9
Let the appliance run for another
20 seconds to obtain any juice still left in
the fruit or vegetables.
2
C
10
To avoid spilling juice on the appliance,
1
remove the bowl along with the juice
extractor accessories after use.
Tips
Before you use the juice extractor:
- cut carrots, white radish, etc.
- peel citrus fruits, pineapples, melons, etc
- stone cherries, plums, apricots, peaches, etc.
Always switch on the appliance before you
put the fruit in the juice extractor.
Switch the appliance off from time to time to
remove pulp from the sieve and the juicer
drum.
Do not process large amounts of food at the
same time.
Switch the appliance off if it starts to vibrate
strongly and clean the pulp sieve and the filter
before you switch the appliance on again.
Cleaning
Always unplug the appliance before you start
cleaning the motor unit.
Publicité
Table des Matières
