Philips Essence HR7753 Mode D'emploi page 11

C
4 Place the adjustable slicing disc on the tool
holder.
5 Close the lid and put the ingredients in the
feed tube.
C
6 Switch to position 1 to get optimal results.
7 Press the ingredients slowly down with the
pusher, if necessary.
Kneading hook
The kneading hook can be used for kneading
bread dough and for mixing batters and cake
mixtures.
C
1 Put the bowl on the motor unit and place
the kneading accessory onto the driving
shaft.
2 Put the ingredients in the bowl and fasten
the lid onto the bowl. Place the pusher in
the feed tube to prevent ingredients from
splattering during the kneading process.
C
3 Select the maximum speed (position 2) on
the speed control.
Blender
The blender is intended for:
- Blending fluids, e.g. dairy products, sauces, fruit
juices, soups, mixed drinks, sweat teas, shakes.
- Mixing soft ingredients, e.g. pancake batter or
mayonnaise.
- Pureeing cooked ingredients, e.g. for making
baby food.
The appliance can be used with or without
the blender attached to the motor unit. If you
use the appliance without the blender, the
appliance will not function if the screw cap
has not been screwed properly onto the
motor unit.
C
1 To attach the blender jar, remove the
1
screw cap which is positioned above the
2
speed control.
C
2 Mount the blender jar on top of the
motor unit by turning it in the direction of
1
the arrow until it is firmly fixed.The handle
2
must be facing to the left!
Do not exert too much pressure on the handle
of the blender jar.
3 Put the ingredients in the blender jar.
C
4 Close the lid.
ENGLISH
11