Installation Steps; Package Contents - Axis Q7900 Rack Guide D'installation

AXIS Q7900 Installation Guide
This installation guide describes the hardware installation of the AXIS Q7900, which can hold up to
14 Axis video encoder blades. To install the Axis video encoder on the network, please see the video
encoder's own installation guide.

Installation steps

Follow these steps to install the AXIS Q7900 on your local network (LAN):
1. Check the package contents against the list below.
2. Hardware overview. See page page 6.
3. Install the hardware. See page 7.

Package contents

Please contact your dealer if anything is missing or damaged.
Item
Video encoder rack
2 cover plates
2 AC power cords
Terminal connectors
Printed materials
Mounting kit
AXIS Q7900 Rack
Installation Guide
Models/variants/notes
AXIS Q7900
• 1 1-port front panel cover
• 6 2-port front panel covers
• Europe
• UK
• US, Canada, Japan
• Australia
• 28 14-pin terminal connectors
• 14 2-pin terminal connectors
• AXIS Q7900 Installation Guide (this document)
• Axis Warranty Document
See separate inventory below
• Switzerland
• Denmark
• South Korea
• Argentina
Page 5